PHONE: (951) 940-6068 FAX (951) 657 0180

Advanced lighweight sound absorbing design

All custom made: You name the size, we'll custom make your panels

  • Standard Panels
    Lightweight 12-15 lbs, 2.25" thick, almost any size or color you specify. Cloth surface is tackable, and absorbs sound .36 NRC rating.
  • Standard LC Partition. This panel consists of a solid foam core, that is fire rated, waterproof and sound absorbant. We use a fire resistant textured cloth surface for the exterior, and finally, we use a specially extruded 6063 airscraft grade aluminum frame, with an anodized surface. The anodizing creates a very hard, attractive surface that will not chip, crack or peel. Each panel is 2.25" thick
Sample Panel Layouts
Layouts 1
Layouts 2
Layouts 3
Layouts 4
Layouts 5
Layouts 6
Layouts 7
Layouts 8
  Back home

LC Custom office panels and partition systems

Standard Panels
Lightweight 12-15 lbs, 2.25" thick, almost any size or color you specify. Cloth surface is tackable, and absorbs sound .36 NRC rating.

  •  Lightweight: A medium sized 4'x6' panel only weighs 12.5 lbs.
    • Sound Absorbant: A 4'x6' panel is rated at .36 NRC
    • Tackable: The surface will accept pins, tacks, and post-it notes
    • Waterproof: There is nothing in the panel that water can degrade
    • Custom sized: We make them to your size specifications

 

 

 
 

LC Trucks can be snapped under any LC Panel. The LC panel can be oriented vertical or horizontal. One set fits any side.

 
  LC panels can be "stacked" as shown above. The metal stands used in this layout were custom-made units: 1"x2" steel rectangular tubing, painted white, nice and strong, ($61 each). This display system was made for "Monday Enterprises" and can be snapped together in about 15 minutes
  Notice the LC Full Acrylic(smoked) panels ($319 each, any size up to 4'x8'). The use of maroon and medium blue fabric (above) is attractive
  These are L-shaped panels. (add $20 for L shape) These can be snapped onto a desk or table. Part of the panel can extend to the floor if desired (as shown). You specify the size (up to certain maximums), and the "cutout" size, then color or surface, and we'll make your panels.
  Desk Toppers. These are handy shelf units that sit on your desk to increase your desk space. We can make these in any shape, double deckers, etc. No holes are required for mounting. They can be installed or taken off anytime. They weight around 30 lbs, and are very strong, holding several hundred pounds is no problem. They are quite handy for large printers, scanners, office supplies, etc. The shelf is normally a white melamine surface, with a black circumferential rubber bumper, and the frame can be painted any color. $165 each for most average sizes. Really big ones cost more
  Need a custom color? Here are some examples of some solid colors that we can provide. The panel frames are anodized aluminum, silver or black, which will never chip, crack, or peel. Going in the attic? We can make angled cuts.. Add $30 per panel
  Angle top panels. These panels can be made with almost any angle specified. Several can be connected together such as these panels created for Exit Realty in Corpus Christy, Texas.
  Two Tone panels. The is a simple process where we cut the cores with a complex hand drawn curve, and upholster the cores with two different colors. This can yield a very attactive and unique look. Any two colors can be used. We can even insert a third color in there. In this industry, most panels are fairly boring to look at. So, this is a way for the panels to make more of a statement about your business or image. This work adds to the labor cost, but not much. Each cut costs $25. So, for a two tone panel, the additional cost is $25. For three colors, the additional cost is $50, and so on.
  Need a pass-through port for extension cords, video cameras, or maybe a pipe. No problem. Here is an example of a 2 inch diameter pass through hole. The flange hardware is removable, in case you wish to enlarge the hole later. We can put this pass through anywhere in the panel core. The cost is $20 extra per panel
  We offer doors w/frames. ($350 for 30"W, $375 for 36"W) The frames are made from heavy 2'x2'x.125" steel tubing, mig-welded at all intersections, very strong. Normally painted with light grey epoxy paint for durability. There is a 4" header at the top. The door comes with a lockable knob and keys. We make the door frames quite strong because the door is a standard door, not a flimsy lightweight. This way, if it ever gets damaged, you can get a standard replacement door locally. (Home Depot or Lowes).
  Notice this large acrylic panel.We still have the protective film over the acrylic. This panel has double electrical conduits mounted low in the panel, and overall, it measures 6'x6'.
  LC Acrylic panels. Shown are examples of acrylic panels. Semi or full sizes, double or single pane. We can put the acrylic inside the panel in any size, and any location within the panel. Acrylic is available in clear, smoked, various colors, translucent or opaque. Here's a price example: $289 for a 4'x8", up to 1/2 acrylic. Add $30 for double pane version
  Single or double pane acrylic windows. Here is an expample of our acrylic framing. This fits inside of our aluminum panel framing. We have a single pane design, and a double pane design. The double pane blocks sound better. The single pane costs $30 less per panel. The price varys with the amount of acrylic needed. Fax or email your preferred dimensions, and we'll quote it for you.
  Here is an example of a sliding window panel, with a screen. We can put these windows anywhere in the panel, and many sizes are available, usually in 12" increments. This panel also features our E-panel conduits for electrical power. Lot's of labor involved, we charge $379 for up to a 4'x8', not counting the conduits
  LC Polar Fleece non woven fabric. This fabric is about 1/8" thick and is more sound absorbant than any woven fabric. It is also hydrophobic, meaning that it does not absorb liquids. This makes it especially good for panels since it repels liquid stains. Like our woven fabrics, it can be cleaned with soap and water, and is machine washable. LC Polar Fleece is made from recycled Polyethylene terephthalate (PET) and is considered "green"
   
   
   
  Custom Carts, sometimes you need one especially for shipping or trade show displays. We design these carts to load/unload quickly. There is no size limit. We can make them any size, vertical (to reduce the warehouse footprint) or horizontal. We make them easy to load/unload, and they can be lockable. They can even be stackable if needed. We normally employ a metal frame with painted wood siding. They are strong, and economical. Prices can range from $700 to $1500 for the really big ones. It all depends upon what your needs are.
  Above are some pictures of dry erase panels that we have made. As you can see, we can make the dry erase almost any size, and put it anywhere in the panel. Also shown are some really cool panels that use green metallic vinyl with charcoal cloth. We sewed them together and covered the panels with them.
  We can print almost anything on fabric, at $20-30 per yard. That fabric can be used in our LC Panel. Your artwork or pictures can be used. It can be removed for machine washing, if needed. Big panoramic views can be created. On the other hand, we can also print the pictures on a plastic surface, if sound absorbtion is not a big issue.
  Above are some pictures of dry erase panels that we have made. As you can see, we can make the dry erase almost any size, and put it anywhere in the panel. Also shown are some really cool panels that use green metallic vinyl with charcoal cloth. We sewed them together and covered the panels with them. A series of these were done for Free Software Foundation. Very creative people over there.
We can print almost anything on fabric, at $20-30 per yard. That fabric can be used in our LC Panel. Your artwork or pictures can be used. It can be removed for machine washing, if needed. Big panoramic views can be created. On the other hand, we can also print the pictures on a plastic surface, if sound absorbtion is not a big issue.
1. No wood in our cores (wood can warp as it dries, and is flammable).
2. No plastic in the frames (plastic can get brittle and the color can change with UV from flourescent lights over time. Aluminum is much better)
3. We typically have the lowest price for your project.
4. The LC panel is designed to be lightweight, and easy to handle and ship.
5. We make the panel sizes you specify for a custom fit, every time.
6. The .36 NRC sound rating is higher than our competition for less money.
7. LC partition systems assemble/disassemble faster than any other system.
8. More versatile; all sides connect, they can be even be stacked.
9. LC panels look good.
10. Waterfriendly. You can even clean them with a garden hose, no problem.
11. No tools required for installation. Connectors just snap into place
12. We can mix surfaces/colors. Dry erase/cloth, Acrylic/chalkboard, etc.
13. We can assist in selling them for you if you don't need them anymore.
14. Our typical short lead times are much faster than our competition.
15. 100% made in the USA, all raw materials and labor, everything.